火焰探测与报警仪器
· 三重红外火焰探测器
· 紫红外火焰探测器
· 紫外线火焰探测器
· 红外线火焰探测器
· 开路有毒气体监测系统
· 车载火焰探测与灭火系
· 舰载火焰探测与灭火系

红外气体传感器

红外测温仪/红外热像仪

红外温度传感器系列

Axetris Infraered Sources

Scitec Instruments

美国Cal Sensors

世界最小人体检测传感器

光离子气体传感器

红外气体传感器

红外产品/传感器

反射式光电套件

编码器传感器

红外发射二极管

光纤传感器

光纤位移传感器

光纤应变传感器

光纤压力传感器

光纤温度传感器

光纤信号调理器

光纤折射率传感器

光电传感器/光谱仪

特种光纤类

光谱仪类

视觉传感器类

测量类

光电传感器类

微波传感器

其它传感器

- SS-807感应开关
- SS-918有线探头
- SS-9181有线探头
- SS-032有线探头
- SS-7832有线探头
+ 人体红外线感应模块
- SS-718人体感应模块
- SS-7182人体感应模块
- SS-718C人体感应模块
+ 超声波感应模块
- SS-311超声波感应模块
- SS-311RT超声波感应模块

超声波测距模块/测距仪
+ 可燃气体感应模块
- SS-310煤气感应模块
+ 315M/433M高频收发模块
- SS-2082接收模块
- SS682接收模块
- SS-610发射模块
+ 湿度模块
- HSM-20G湿度模块
- HTF3223湿度模块
- HTF3225湿度模块
+ 微波模块
- SS100微波移动传感器
- SS-719微波感应模块
+ 315M/433M高频工业控制器
- SS-1226控制器
- SS-1228控制器
+ 烟雾/煤气感应模块
- SS-312烟雾/煤气感应模块

人体感应开关--墙壁式安装
人体感应开关--吸点式安装

光电器件传感器
紫外线传感器
颜色传感器亮度传感器
热释电红外传感器
光敏电阻光敏传感器
VTL5C系列模拟光隔离器
光电晶体管
CPM端窗式光电倍增管以及模块
单光子计数模块
NDIR红外气体传感器
红外温度传感器
红外光源
CCD图像传感器；线阵CCD相机
激光器件；大功率红外发射管
高速PN、PIN、APD等光电探测器
X射线探测器

三频红外火焰探测器

SYP-UVT46A/SYP-UVT46B

UV辐射

应用电路

红外光电系列

光电二极管

光电晶体管

特殊光探测器

光电耦合器

红外发射管

红外接收管/红外线接收器

红外接收头

光敏三极管

光电传感IC

硅光电池管

太阳能电池

镭射激光管/激光二极管

发光二极管

传感器件系列

凹槽型开关/透射式光电传感器

反射式开关/反射式光电传感器

红外数据头/数据传输器

霍尔传感器

光纤传感器

人体传感器

声波传感器

气体传感器

温湿传感器

颜色传感器

压力传感器

菲涅尔透镜

接近传感器

微波感应器

高频元件系列

双栅场效应管

高频微波管

集成IC系列

红外数据IC

红外遥控IC

蓝牙通讯IC

图像传感器

光鼠球鼠对管IC
摄像数字影像IC
手机周设/手机IC
光电藕合器IC
激光管/激光IC
光电开关
反射接近开关
红外接收管
红外发射管
红外接收头
光敏接收管
发光管/数码管
光纤接收/发射头
闪光管
放电管
硅光电池
紫外线传感器
热释传感器/菲透镜　
超声波传感
霍尔元件干簧管/磁传感器　
数据传输器
热电堆/红外测温计
光敏电阻

激光二极管驱动控制器　

中红外发光二极管

硅光电探测器

德国倍加福P+F

PerkinElmer

德国海曼HEIMAAN传感器

光电传感器德国SICK

光电传感器美国HONEYWELL

DI-SORIC传感器

宝德Burkert

施迈赛Schmersal

SMC气动元件

SKF轴承系列产品

日本基恩士KEYENCE

日本竹中(TAKEX)

欧姆龙(OMRON)

基恩士（ KEYENCE）

神视（SUNX）

德国倍加福P+F

boseline-mocon

ICX

图尔克TURCK

SETRA

DANAHER

IMT

HAMAMATSU滨松

KODENSHI

ALEPH

SIEMENS

YAMATAKE

OPTEK

E2V

WIKA

LITEON

OSRAM

SANYO

SHARP

STANLEY

VISHAY

EVERLIGHT

OPTO SENSOR

PANASONIC

ROHM

TAOS

安捷伦AGILENT

MEAS传感器

选型目录产品介绍资料下载应用介绍图片资料其它

Photoconductive Infrared Detectors

PbS (SCD-13) and PbSe (SCD-15) Detectors

Cal Sensors has developed and is a volume producer of photoconductive lead sulfide (PbS) and lead selenide (PbSe) infrared detectors / Infrared Sensors which cover the 1 µm to 5.5 µm spectral region.

Our SCD-13 and SCD-15 IR detectors are manufactured via well established and superbly controlled processes, and because of their proven performance, have become the infrared detectors of choice by most system manufacturers worldwide.
　

PbS (SCD-13) Detectors
PbSe (SCD-15) Detectors

Lead Sulfide (PbS/SCD-13) Detectors

Photoconductive Infrared (IR) Detectors

This section is intended as a design guide to:

Outline products for which detector active area
and package tooling exists
Describe typical ranges of readily available detector
characteristics and performance

Detector Specifications:

IDA (Integrated IR Detector Assembly)
Uncooled SCD-13 Detectors (Ambient Packaged)
One Stage TEC SCD-13 Detectors (50° typical DT)
Two Stage (1.5W) TEC SCD-13 Detectors (60° typical DT)
Two Stage (2.5W) TEC SCD-13 Detectors (75° typical DT)

Lead Selenide (PbSe/SCD-15) Detectors

Photoconductive Infrared (IR) Detectors

This section is intended as a design guide to:
　

Outline products for which detector active area
and package tooling exists
Describe typical ranges of readily available detector
characteristics and performance

Detector Specifications:

IDA (Integrated IR Detector Assembly)
Uncooled SCD-15 Detectors (Ambient Packaged)
One Stage TEC SCD-15 Detectors (50° typical DT)
Two Stage (1.5W) TEC SCD-15 Detectors (60° typical DT)
Two Stage (2.5W) TEC SCD-15 Detectors (75° typical DT)

Multi Element Arrays

For applications that require multiple detector elements

MCD Array — For applications that require only a few detector elements, each element can be bonded to a dedicated package pin. These also include packages with multiple detector types.

Multi-Color Detectors :
- Multi-Color Coplanar Detector Assemblies
- Two Color Coaxial Detector Assemblies
　
Arrays to 64 Elements:
- Arrays to 64 Elements - LMA-13R & LMA-15R
- Drawings & Application Notes

LMA Array — For applications requiring a larger number of elements, multiplexing provides a convenient way to reduce the package pin count. Signal conditioning is also provided.

PbS Arrays
PbSe Arrays
Development Systems

Infrared Emitters: Cal-Source™

After years of extensive development and testing, Cal Sensors has developed low cost, high reliability pulsable and steady-state emitters specifically designed for use with infrared detectors.

Cal-Source infrared emitters, constructed with rugged, proven packaging techniques developed at Cal Sensors, offer a new level in state-of-the-art design and performance:

Rugged construction
High emissivity
Long lifetime
Low cost
UV through IR
Small size
Low power consumption

AP Series - Uncooled SCD-13 Detectors

Ambient Temperature:	+23°C
Detector Operating Temperature	+23°C

Detectors tested using 50 V/mm across the detector and a one Megohm load resistor in series. (except AP-1x3, AP-1x5, and AP-2x5 use 0.5 megohm load resistor.)
Standard Specifications - Electrical
	Minimum	Typical	Maximum	Units
Wavelength of Max. Response	2.2	2.4		µm
*D(500K, 650 Hz, 1Hz)**	7.5 x 10⁸	9.4 x 10⁸		cm Hz^1/2 w^-1
*D( l_pk, 650 Hz, 1 Hz)**	8.0 x 10¹⁰	1.0 x 10¹¹		cm Hz^1/2 w^-1
Element Resistance (Dark)	0.5	1.0	2.0	Megohms/
Time Constant (not measured)		200	400	µsec
Rated Element Temperature			+65	°C

When using the table below, remove parenthesis and insert appropriate designation for package type in this space: Example: 3 for TO-3, 5 for TO-5, 8 for TO-8.

Model Number	Element Size (mm)	Responsivity (l_pk, 650) vw-1		Standard Package Options
Model Number	Element Size (mm)	Minimum	Typical	Standard Package Options
AP-1( )	1 x 1	5.3 x 10⁵	8.0 x 10⁵	TO-5, TO-8
AP-1 x 3( )	1 x 3	2.1 x 10⁵	3.1 x 10⁵	TO-5, TO-8
AP-1 x 5( )	1 x 5	1.2 x 10⁵	1.8 x 10⁵	TO-5, TO-8
AP-2( )	2 x 2	2.7 x 10⁵	4.0 x 10⁵	TO-5, TO-8
AP-2 x 5( )	2 x 5	0.8 x 10⁵	1.2 x 10⁵	TO-5, TO-8
AP-3( )	3 x 3	1.7 x 10⁵	2.6 x 10⁵	TO-5, TO-8
AP-48	4 x 4	1.3 x 10⁵	2.0 x 10⁵	TO-8
AP-58*	5 x 5	1.1 x 10⁵	1.6 x 10⁵	TO-8
AP-68*	6 x 6	9.0 x 10⁴	1.4 x 10⁵	TO-8
AP-103**	10 x 10	5.0 x 10⁴	7.5 x 10⁴	TO-3
* Minimum D(l_pk, 650, 1) >7.0 x 10¹⁰ cm Hz^1/2 w^-1 Minimum D(l_pk, 650, 1) >6.0 x 10¹⁰ cm Hz^1/2 w^-1

AT1 Series - One Stage TE Cooled SCD-13 Detectors

Ambient Temperature:	+25°C
Detector Operating Temperature	-25°C
Typical Cooler Power @/or near Max. Cooling:	AT1 - 1.0 volts @1.2 amps AT1S - 1.8 volts @ 1.2 amps
Standard Specifications - Electrical All detector specifications are at a bias voltage of 50 V/mm distance between electrodes applied across the detector and with a one megohm load resistor in series. All specifications apply at or near maximum cooling with the heat sink @ +25°C.

	Minimum	Typical	Maximum	Units
Wavelength of Max. Response	2.4	2.5		µm
*D(500K, 650 Hz, 1Hz)**	1.0 x 10⁹	1.5 x 10⁹		cm Hz^1/2 w^-1
*D( l_pk, 650 Hz, 1 Hz)**	1.0 x 10¹¹	1.5 x 10¹¹		cm Hz^1/2 w^-1
Element Resistance (Dark)	1.5	3.0	10.0	Megohms/
Time Constant (not measured)		800	1600	µsec
Rated Element Temperature			+65	°C
DT@/or near Max. Cooling	45	50		°C

For square or rectangular element sizes and/or packages not listed, please contact our application engineers, phone (707) 303-3837, or fax (707) 545-5113.

When using the table below, remove parenthesis and insert appropriate designation for package type in this space: Example: 6 for TO-66, 7 for TO-37, 8 for TO-8.

Model Number	Element Size (mm)	Responsivity (l_pk, 650) vw-1		Standard Package Options
Model Number	Element Size (mm)	Minimum	Typical	Standard Package Options
AT1-1( )	1 x 1	1.3 x 10⁶	1.9 x 10⁶	TO-37,TO-8
AT1-2( )	2 x 2	6.3 x 10⁵	9.5 x 10⁵	TO-37,TO-8
AT1-3( )	3 x 3	4.2 x 10⁵	6.3 x 10⁵	TO-37,TO-8
AT1S-4( )	4 x 4	3.1 x 10⁵	4.7 x 10⁵	TO-66, TO-8
AT1S-5( )*	5 x 5	2.5 x 10⁵	3.8 x 10⁵	TO-66, TO-8
AT1S-6( )*	6 x 6	2.0 x 10⁵	3.0 x 10⁵	TO-66, TO-8
AT1S-103**	10 x 10	1.2 x 10⁵	1.8 x 10⁵	TO-3
* Minimum D(l_pk, 650, 1) >8.0 x 10¹⁰ cm Hz^1/2 w^-1 Minimum D(l_pk, 650, 1) >7.0 x 10¹⁰ cm Hz^1/2 w^-1

To specify thermistor option for all TE cooled detectors, add the suffix -T or -TC (calibrated) to the model number.

AT2 Series - Two Stage (1.5W)
TE Cooled SCD-13 Detectors

Ambient Temperature:	+25°C
Detector Operating Temperature	-35°C
Typical Cooler Power @/or near Max. Cooling:	0.9 volts @1.2 amps

Standard Specifications - Electrical All detector specifications are at a bias voltage of 50 V/mm distance between electrodes applied across the detector and with a one megohm load resistor in series. All specifications apply at or near maximum cooling with the heat sink @ +25°C.
	Minimum	Typical	Maximum	Units
Wavelength of Max. Response	2.5	2.6		µm
D*(500K, 650 Hz, 1Hz)	1.6 x 10⁹	2.7 x 10⁹		cm Hz^1/2 w^-1
D*( l_pk, 650 Hz, 1 Hz)	1.5 x 10¹¹	2.5 x 10¹¹		cm Hz^1/2 w^-1
Element Resistance (Dark)	2.5	5.0	15.0	Megohms/
Time Constant (not measured)		1250	2500	µsec
Rated Element Temperature			+65	°C
DT@/or near Max. Cooling	55	60		°C

For square or rectangular element sizes and/or packages not listed, please contact our application engineers, phone (707) 303-3837, or fax (707) 545-5113.

When using the table below, remove parenthesis and insert appropriate designation for package type in this space: Example: 6 for TO-66, 7 for TO-37, 8 for TO-8.

Model Number	Element Size (mm)	Responsivity (l_pk, 650) vw-1		Standard Package Options
Model Number	Element Size (mm)	Minimum	Typical	Standard Package Options
AT2-1( )	1 x 1	1.3 x 10⁶	2.0 x 10⁶	TO-37, TO-8
AT2-2( )	2 x 2	6.6 x 10⁵	1.0 x 10⁶	TO-37, TO-8
AT2-3( )	3 x 3	4.3 x 10⁵	6.4 x 10⁵	TO-37, TO-8
AT2-4( )*	4 x 4	3.2 x 10⁵	4.8 x 10⁵	TO-37, TO-8
* Minimum D*(l_pk, 650, 1) >1.0 x 10¹¹ cm Hz^1/2 w^-1

To specify thermistor option for all TE cooled detectors, add the suffix -T or -TC (calibrated) to the model number.

AT2S Series - Two Stage (2.5W)
TE Cooled SCD-13 Detectors

Ambient Temperature:	+25°C
Detector Operating Temperature	See model types below
Typical Cooler Power @/or near Max. Cooling:	1.8 volts @1.2 amps

Standard Specifications - Electrical All detector specifications are at a bias voltage of 50 V/mm distance between electrodes applied across the detector and with a one megohm load resistor in series. All specifications apply at or near maximum cooling with the heat sink @ +25°C.
	Minimum	Typical	Maximum	Units
Wavelength of Max. Response	2.6	2.7		µm
D*(500K, 650 Hz, 1Hz)	2.2 x 10⁹	3.3 x 10⁹		cm Hz^1/2 w^-1
D*(l_pk, 650 Hz, 1 Hz)	2.0 x 10¹¹	3.0 x 10¹¹		cm Hz^1/2 w^-1
Element Resistance (Dark)	3.0	6.0	20.0	Megohms/
Time Constant (not measured)		1750	3500	µsec
Rated Element Temperature			+65	°C
DT@/or near Max. Cooling	70	75		°C

For square or rectangular element sizes and/or packages not listed, please contact our application engineers, phone (707) 303-3837, or fax (707) 545-5113.

When using the table below, remove parenthesis and insert appropriate designation for package type in this space: Example: 6 for TO-66, 8 for TO-8.

Model Number	Element Size (mm)	Responsivity (l_pk, 650) vw-1		Operating Temp	Standard Package Options
Model Number	Element Size (mm)	Minimum	Typical	Operating Temp	Standard Package Options
AT2S-1( )	1 x 1	1.4 x 10⁶	2.1 x 10⁶	-50°C	TO-66, TO-8
AT2S-2( )	2 x 2	7.0 x 10⁵	1.1 x 10⁶	-50°C	TO-66, TO-8
AT2S-3( )	3 x 3	4.3 x 10⁵	6.5 x 10⁵	-45°C	TO-66, TO-8
AT2S-4( )	4 x 4	3.3 x 10⁵	5.0 x 10⁵	-40°C	TO-66, TO-8
AT2S-5( )*	5 x 5	2.7 x 10⁵	4.0 x 10⁵	-35°C	TO-66, TO-8
AT2S-6( )*	6 x 6	2.4 x 10⁵	3.6 x 10⁵	-25°C	TO-66, TO-8
* Minimum D*(l_pk, 650, 1) >1.0x10¹¹ cm Hz^1/2 w^-1

BXP Series - Uncooled SCD-15 Detectors

Ambient Temperature:	+23°C
Detector Operating Temperature	+23°C
Detectors tested using 35 V/mm across the detector and a one Megohm load resistor in series.

Standard Specifications - Electrical
	Minimum	Typical	Maximum	Units
Wavelength of Max. Response	3.6	3.8		µm
D*(500K, 1000 Hz, 1Hz)	1.0 x 10⁸	1.5 x 10⁹		cm Hz^1/2 w^-1
D*( l_pk, 1000 Hz, 1 Hz)	1.0 x 10⁹	1.5 x 10¹⁰		cm Hz^1/2 w^-1
Element Resistance (Dark)	0.1	0.8	2.5	Megohms/
Time Constant (not measured)		2	5	µsec
Rated Element Temperature			+85	°C

When using the table below, remove parenthesis and insert appropriate designation for package type in this space. Example: 5 for TO-5, 8 for TO-8.

Model Number	Element Size (mm)	Responsivity (l_pk, 1000) vw-1		Standard Package Options
Model Number	Element Size (mm)	Minimum	Typical	Standard Package Options
BXP-1( )	1 x 1	1.5 x 10⁴	3.0 x 10⁴	TO-5,TO-8
BXP-2( )	2 x 2	7.5 x 10³	1.5 x 10⁴	TO-5,TO-8
BXP-3( )	3 x 3	5.0 x 10³	1.0 x 10⁴	TO-5,TO-8
BXP-48	4 x 4	3.75 x 10³	7.5 x 10³	TO-8
BXP-58 *	5 x 5	3.0 x 10³	6.0 x 10³	TO-8
BXP-68 *	6 x 6	2.5 x 10³	5.0 x 10³	TO-8
BXP-103**	10 x 10	1.5 x 10³	3.0 x 10³	TO-3
* Minimum D( l_pk, 1000 Hz, 1 Hz) > 8 x 10⁹ cm Hz^1/2 w^{-1 }Minimum D( l_pk, 1000 Hz, 1 Hz) > 6 x 10⁹ cm Hz^1/2 w^-11/4 x 1/4mm, 1/2 x 1/2mm, 1 x 3mm, 1 x 5mm & 2 x 5mm element sizes also available.

BXT1 Series - One Stage TE Cooled SCD-15 Detectors

Ambient Temperature:	+25°C
Detector Operating Temperature	-25°C
Typical Cooler Power @/or near Max. Cooling:	BXT1 -1.0 volts @1.2 amps BXT1S - 1.8 volts @ 1.2 amps

Standard Specifications - Electrical All detector specifications are at a bias voltage of 25 V/mm distance between electrodes applied across the detector and with a load resistor in series. All specifications apply at or near maximum cooling with the heat sink @ +25°C.
	Minimum	Typical	Maximum	Units
Wavelength of Max. Response	4.0	4.2		µm
D*(500K, 1000 Hz, 1Hz)	1.9 x 10⁹	3.9 x 10⁹		cm Hz^1/2 w^-1
D*( l_pk, 1000 Hz, 1 Hz)	1.4 x 10¹⁰	2.8 x 10¹⁰		cm Hz^1/2 w^-1
Element Resistance (Dark)	0.5	4.0	10.0	Megohms/
Time Constant (not measured)		6	12	µsec
Rated Element Temperature			+55	°C
DT@/or near Max. Cooling	45	50		°C

Other detector configurations available upon request,
please contact our application engineers, phone (707) 303-3837,
or fax (707) 545-5113.

When using the table below, remove parenthesis and insert appropriate designation for package type in this space. Example: 5 for TO-5, 8 for TO-8.

Model Number	Element Size (mm)	Responsivity (l_pk, 1000) vw-1		Standard Package Options
Model Number	Element Size (mm)	Minimum	Typical	Standard Package Options
BXT1-1( )	1 x 1	40000	60000	TO-37,TO-8
BXT1-2( )	2 x 2	20000	30000	TO-37,TO-8
BXT1-3( )	3 x 3	13300	20000	TO-37,TO-8
BXT1S-4( )	4 x 4	10000	15000	TO-66, TO-8
BXT1S-5( )*	5 x 5	8000	12000	TO-66, TO-8
BXT1S-6( )*	6 x 6	6700	10000	TO-66, TO-8
BXT1S-103**	10 x 10	4000	6000	TO-3
* Minimum D( l_pk, 1000, 1) >1.0 x 10¹⁰ cm Hz^1/2 w^-1 * Minimum D*( l_pk, 1000, 1) >8.0 x 10⁹ cm Hz^1/2 w^-1

BXT2 Series - Two Stage (1.5W)
TE Cooled SCD-15 Detectors

Ambient Temperature:	+25°C
Detector Operating Temperature	-35°C
Typical Cooler Power @/or near Max. Cooling:	0.9 volts @1.2 amps

Standard Specifications - Electrical All detector specifications are at a bias voltage of 25 V/mm distance between electrodes applied across the detector and with a load resistor in series. All specifications apply at or near maximum cooling with the heat sink @ +25°C.
	Minimum	Typical	Maximum	Units
Wavelength of Max. Response	4.1	4.3		µm
D*(500K, 1000 Hz, 1Hz)	2.2 x 10⁹	4.2 x 10⁹		cm Hz^1/2 w^-1
D*( l_pk, 1000 Hz, 1 Hz)	1.6 x 10¹⁰	3.0 x 10¹⁰		cm Hz^1/2 w^-1
Element Resistance (Dark)	1.0	5.0	15.0	Megohms/
Time Constant (not measured)		9	20	µsec
Rated Element Temperature			+55	°C
DT@/or near Max. Cooling	55	60		°C

Other detector configurations available upon request,
please contact our application engineers, phone (707) 303-3837,
or fax (707) 545-5113.

When using the table below, remove parenthesis and insert appropriate designation for package type in this space. Example: 5 for TO-5, 8 for TO-8.

Model Number	Element Size (mm)	Responsivity (l_pk, 1000) vw-1		Standard Package Options
Model Number	Element Size (mm)	Minimum	Typical	Standard Package Options
BXT2-1( )	1 x 1	66000	100000	TO-37,TO-8
BXT2-2( )	2 x 2	33000	50000	TO-37,TO-8
BXT2-3( )	3 x 3	22000	33000	TO-37,TO-8
BXT2-4( )	4 x 4	16000	25000	TO-8

BXT2S Series - Two Stage (2.5W)
TE Cooled SCD-15 Detectors

Ambient Temperature:	+25°C
Detector Operating Temperature	See model types below
Typical Cooler Power @/or near Max. Cooling:	1.8 volts @1.2 amps

Standard Specifications - Electrical All detector specifications are at a bias voltage of 25 V/mm distance between electrodes applied across the detector and with a load resistor in series. All specifications apply at or near maximum cooling with the heat sink @ +25°C.
	Minimum	Typical	Maximum	Units
Wavelength of Max. Response	4.3	4.5		µm
D*(500K, 1000 Hz, 1Hz)	2.9 x 10⁹	5.2 x 10⁹		cm Hz^1/2 w^-1
D*( l_pk, 1000 Hz, 1 Hz)	2.0 x 10¹⁰	3.5 x 10¹⁰		cm Hz^1/2 w^-1
Element Resistance (Dark)	1.0	6.0	20.0	Megohms/
Time Constant (not measured)		12	25	µsec
Rated Element Temperature			+55	°C
DT@/or near Max. Cooling	Scroll to see chart below			°C

Other detector configurations available upon request,
please contact our application engineers, phone (707) 303-3837,
or fax (707) 545-5113.

When using the table below, remove parenthesis and insert appropriate designation for package type in this space. Example: 6 for TO-66, 8 for TO-8.

Model Number	Element Size (mm)	Responsivity ( l_pk, 1000) vw-1		Operating Temp	Standard Package Options
Model Number	Element Size (mm)	Minimum	Typical	Operating Temp	Standard Package Options
BXT2S-1( )	1 x 1	100000	150000	-50°C	TO-66, TO-8
BXT2S-2( )	2 x 2	50000	75000	-50°C	TO-66, TO-8
BXT2S-3( )	3 x 3	33000	50000	-45°C	TO-66, TO-8
BXT2S-4( )	4 x 4	25000	37500	-40°C	TO-66, TO-8
BXT2S-5( )*	5 x 5	20000	30000	-35°C	TO-66, TO-8
BXT2S-6( )*	6 x 6	16500	25000	-25°C	TO-66, TO-8
* Minimum D*( l_pk, 1000, 1) >1.5 x 10¹⁰ cm Hz^1/2 w^-1

LMA (Mux) LMA-13R Arrays

256 Element Array Integrating Multiplexer, Thermoelectric Cooler The Cal Sensors 256 element linear array is specifically designed for low-cost spectroscopy from 1 to 3 microns. This industry standard, low profile package includes high aspect ratio pixels on 50 micron centers. The internal electronics provide variable integration and dark current correction. Temperature stabilization is achieved by an internal thermoelectric cooler and thermistor

Features

256 element LMA-13R detector array
Sensitivity to 3 microns
High aspect ratio elements on 50 μm centers
　
Thermoelectric cooler with integrated thermistor
　
Industry standard low profile 28-pin package
　
Internal MUX with serial readout up to 2 MHz
　
Global plus 8 bit per pixel dark current correction
　
Signal Integration before or during readout
　
Variable integration with adjustable well size

LMA (Mux) LMA-15R Arrays

Multiplexed PbSe Array The Cal Sensors 256 element linear array is specifically designed for low-cost spectroscopy from 1 to 5 microns. This industry standard, low profile package includes high aspect ratio pixels on 50 micron centers. The internal electronics provide variable integration and dark current correction. Temperature stabilization is achieved by an internal thermoelectric cooler and thermistor.

Features

256 element LMA-15R detector array
　
Sensitivity to 5 microns
　
High aspect ratio elements on 50 μm centers
　
Thermoelectric cooler with integrated thermistor
　
Industry standard low profile 28-pin package
　
Internal MUX with serial readout up to 2 MHz
　
Global plus 8 bit per pixel dark current correction
　
Signal Integration before or during readout
　
Variable integration with adjustable well size

红外测温仪/红外热像仪常用红外温度传感器系列常用红外温度传感器及资料下载红外温度传感器模块摸组红外线温度传感器一红外线温度传感器二红外线温度传感器三红外线温度传感器四红外测温模块一红外测温模块二红外测温模块三红外测温模块四红外热像红外气体分析红外行业应用红外相关配件红外技术资料红外火焰探测器红外气体分析器件红外气体分析原理

热释电红外人体感应传感器系列产品/防盗报警配套元器件
	红外传感器	RE200B	KDS209、PIS209	LHI958、LHI878	PD632
	红外专用芯片	BISS0001	BISS0002	CS9803GP	KC778B
	红外专用芯片	MB8072	HT7610	M7612	M7610
	菲涅尔透镜	7601	7701	7703	7708
	菲涅尔透镜选购资料	7709	7802	7803	7807
		7808	8002-1	8002-2	8102
	透镜图片选型类	系列1	系列2	系列3	系列4
	感应开关,报警器	GH-903	HT-807	GH-608	主动红外入侵探测器
批量生产	人体红外感应模块	SS-101	红外火焰探测器		安防防盗报警配套IC

红外出入口控制探测器	吸顶式被动红外探测器
被动红外幕帘式防盗探测器	被动红外探测器
长距离被动红外探测器	无限被动红外FR920
DS835IT	三技术红外探测器
吸顶式三技术红外探测器	长距离三技术红外探测器
光电对射探测器	单射束光电对射探测器
双射束光电对射探测器	四射束光电对射探测器
操作手册	红外测距传感器/距离测量传感器

紫外传感器	被动式红外传感器
汽车尾气四/五气模块	红外气体传感器
红外发射管	红外探测器
红外接收管	红外非接触测温传感器
红外非接触测温模块	非接触红外测温仪
热释电红外传感器	红外中断开关
光电编码元件	光电组件
红外中断开关	热电堆传感器
紫外光敏管、紫外光管、紫外光电管详细资料下载	红外发射二极管

SS-101红外线人体感应模块使用说明 SS-968微波感应模块/雷达探测模块使用说明 SS-9261微波感应模块/雷达探测模块使用说明

安防产品	主动红外	被动红外	门窗磁控感应器
其它产品	电子元器件产品	液位传感器	接近传感器
干簧管	磁簧继电器	光电传感器	液位开关
浮子

CO 红外探测器 CH4红外探测器 CO2红外探测器 SF6红外探测器 SO2红外探测器 HC红外探测器

红外光源红外光电气体传感器 NDIR红外气体传感器红外温度传感器红外气体分析器件

CO2红外光源 CH4红外光源 CO红外光源 C3H8红外光源 C4H10红外光源 C2H4红外光源 C2H2红外光源 SF6红外光源 SO2红外光源 HC红外光源

Photoconductive Infrared Detectors

PbS (SCD-13) and PbSe (SCD-15) Detectors

Lead Sulfide (PbS/SCD-13) Detectors

Photoconductive Infrared (IR) Detectors

Detector Specifications:

Lead Selenide (PbSe/SCD-15) Detectors

Photoconductive Infrared (IR) Detectors

Detector Specifications:

Multi Element Arrays

For applications that require multiple detector elements

Infrared Emitters: Cal-Source™

AP Series - Uncooled SCD-13 Detectors

AT1 Series - One Stage TE Cooled SCD-13 Detectors

AT2 Series - Two Stage (1.5W) TE Cooled SCD-13 Detectors

AT2S Series - Two Stage (2.5W) TE Cooled SCD-13 Detectors

BXP Series - Uncooled SCD-15 Detectors

BXT1 Series - One Stage TE Cooled SCD-15 Detectors

BXT2 Series - Two Stage (1.5W) TE Cooled SCD-15 Detectors

BXT2S Series - Two Stage (2.5W) TE Cooled SCD-15 Detectors

LMA (Mux) LMA-13R Arrays

Features

LMA (Mux) LMA-15R Arrays

Features

AT2 Series - Two Stage (1.5W)
TE Cooled SCD-13 Detectors

AT2S Series - Two Stage (2.5W)
TE Cooled SCD-13 Detectors

BXT2 Series - Two Stage (1.5W)
TE Cooled SCD-15 Detectors

BXT2S Series - Two Stage (2.5W)
TE Cooled SCD-15 Detectors